词语站>英语词典>pinions翻译和用法

pinions

英 [ˈpɪnjənz]

美 [ˈpɪnjənz]

v.  捆住,缚住(双臂); 固定住
pinion的第三人称单数

柯林斯词典

  • VERB (尤指通过抓住或绑住双臂)使动弹不得
    If youare pinioned, someone prevents you from moving or escaping, especially by holding or tying your arms.
    1. At nine the next morning Bentley was pinioned, hooded and hanged.
      次日上午9点,本特里被捆住双臂、戴上头罩,然后绞死了。

双语例句

  • Both gear centers have pinions with only half tooth. The four main types of gears ( spur, helical, worm, and bevel) and a rack and pinion are shown in Figure 7.
    两个齿轮其中心都有一个小齿轮,这个小齿轮只有半边有齿轮。图7所示是四种主要的齿轮(巨齿轮,斜齿轮,蜗轮和伞齿轮)以及齿条和小齿轮。
  • Reverse idler gear shaft bearing Both gear centers have pinions with only half tooth.
    回动空转齿轮轴轴承两个齿轮其中心都有一个小齿轮,这个小齿轮只有半边有齿轮。
  • A Study of Tooth Longitudinal Modifications on Locomotive Tractive Pinions
    机车牵引齿轮齿向修形研究
  • Through a comparison of natural frequencies experimentally collected and numerically computed, the modified torsional model is proved to be more accurate than the purely torsional model and may be applied to dynamic design of epicyclic gearing with equally-spaced pinions.
    固有频率敲击试验表明,与纯扭转模型相比,修正扭转模型更具工程应用价值,可用以指导2K-H均布行星传动的动态设计。
  • Overcutting Test of the Rough-machining of Hypoid Pinions
    准双曲面齿轮的小轮粗切过切检验
  • These four pinions act as bridges between the side gears.
    这四组小齿轮起到连接侧方齿轮组的桥梁作用。
  • A modified torsional model of planetary gear trains with equally-spaced pinions is developed and used to identify unique properties of natural frequencies and vibration modes.
    建立了2K-H均布行星传动的修正扭转模型,以揭示系统的固有频率与振动模态特性。
  • Equipped with compound gearing consisting of 2 pinions and 2 wheels in mesh to increase the mechanical advantage.
    装有两个小齿轮和两个轮子啮合在一起的复合齿轮装置,以此提高机械效率。
  • Compared with the purely torsional model, tangential displacements and bearing stiffness of the pinions are included in the governing equation of motion.
    该模型在纯扭转模型的基础上,进一步计入了行星轮轴心沿系杆切向的位移与行星轮轴的轴承支承刚度对系统动力学性能的影响。
  • This series machine is suitable for batch or single manufacturing column straight pinions, slope pinions, helical gear and worm gear.
    该机床适用于批量及单件生产加工圆柱直齿轮、斜齿轮、链轮及蜗轮。